| |
 |
When an HF Linear
Amplifier is not tuned correctly, out of band, unintelligible RF products will develop. |
|
The " Splatter
View" model RF-D (RF Demodulator) and series RF-S
(Variable RF Sampler) were created to ensure that your signal remains truly linear and distortion free for maximum intelligibility! (See
" Splatter View" Series products) |
|
Now, a real-time signal comparison between
your amplifier's various pre and post operating conditions can be achieved! |
|
The model RF-D
and series RF-S, when used with your existing oscilloscope, will provide a reference observation as
your occupied RF bandwidth remains directly proportional to your transmitter's audio passband. Say goodbye to mistuned nonlinear amplifiers
and dirty signals forever! |
Be Linear And Clean With the Model RF-D RF Demodulator, Series RF-S Variable RF Sampler,
and RF-AM AM Modulation Monitor For Your Oscilloscope Station Monitoring!
|
|
The model RF-D (RF Demodulator) is designed to directly demodulate the RF envelope from
your transmitter to a usable signal suitable for feeding the Horizontal "X" input of your oscilloscope. This establishes a
pre-amplifier reference signal.
Additionally, the RF-D (RF Demodulator) may be used as an AM Audio Modulation Monitor yielding
a flat audio frequency response ranging from 10 Hz to 16 kHz as well as providing envelope source trigger synchronization. |
The model RF-S2K (Variable RF Sampler) is designed to directly sample and convert the RF
envelope from a high power amplifier to a usable signal suitable for feeding the Vertical "Y" input of your oscilloscope. This
may be used to establish a post-amplifier reference signal when used with the RF-D.
Additionally, the RF-S2K (Variable RF Sampler) may be used as an RF coupling probe for spectrum
analysis, RF envelope observation or frequency counting and control. |
|
